Page 655 - Lewis

654 Putty, Foam and Fillers

Urethane Foam Two-Part System White Gel-Coat
With Wax – Interior
No Wax – Exterior

1490
1450
1500

FIG 1385b

A white pigmented polyester gel-coat to repair the original,
high-gloss gel-coat finish. Use to conceal gouges, chips, and
scrapes in fiberglass gel-coat. A non-run, non-sag formulation
of rigid, flexible polyester resins. Use Resin Colorant to tint
Gel-Coat. Adding Resin Colorant to White Gel-Coat will pro-
duce pastel colors. Easy to sand. MEK hardener INCLUDED.
No. Each Color Wax Size Case
FIG 1387b 1480 $35.85 White Yes Pint 12
1490 49.45 White Yes Quart 12
1500 157.70 White Yes Gallon 4
Two-part Urethane Foam provides excellent flotation and insu- 1450 148.65 White No Gallon 4
lation qualities in a wide variety of uses. One cubic foot of For M.E.K. Hardener — See Fig. 1379
Urethane Foam supports 50-60 pounds of weight. Use under For Color Pigments — See Fig. 1378
floor boards, seats, decks, and in pontoons for flotation, rigidi- WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
ty and insulation around motor covers, roofs, pipes and
behind wall panels, non fire retardant. 1800 quart kit covers 2.5
cubic feet; 1810 gallon kit covers 10 cubic feet. Two pounds per Resin Thinner – Styrene
PUTTY, FOAM AND FILLERS 1810 318.75 New 2-Gal. Kit 10 cu. ft. 600 lbs. 2 Kits
cubic foot density.
Mixed
Approx.
Case
Yields
Flotation
No.
Kit
Size
3 Kits
1800 $100.10
2.5 cu. ft.
2-Qt. Kit
150 lbs.
Kwik Foam
Insulating Sealant
Formula
FIG 1388b
A thinner for all polyester resins and gelcoats. When used for
spraying, reduce 5%. Not for use with epoxy products.
No. Each Size Case
P $17.40 Pint 12
For Acetone — See Fig. 1301

Nitro-Stan Spot and Glazing Putty

FIG 8589b

This heavy-duty foam sealant is a one-component, moisture
cure, polyurethane insulating foam that expands to fill and
seal large cavities. It expands to form a permanent, water FIG 2005b
resistant bond to wood, concrete, metal, or glass. It stops air
infiltration and will not shrink or degrade. Tack free in 5 min- For filling scratches, sanding marks, pinholes and other imper-
utes; cut in 1 hour. 12 oz. can seals up to 500 lineal feet at a fections with lacquer, acrylic, synthetic or urethane systems. It
1/2" bead. 24 oz. can seals up to 1000 lineal feet at a 1/2" is quick drying, yet smooth spreading with no drag. Easy sand-
bead. Reusable up to 30 days. ing, wet or dry. Minimum shrinkage with maximum hold-out.
No. Each Size Description No. Each Size Color Case
18230 $19.95 12 oz. Insulation Foam R-5 9001 $26.15 1 lb. Red 12
18232 35.95 24 oz. Insulation Foam R-5 9002 26.15 1 lb. White 12