Page 100 - Vetus

ACCESSORIES

Rubber exhaust hose type SLANG Silicone hose type SIHOSE
Flexible and strong, saving valuable Extremely high temperature resistance
installation time For a complete overview and
For a complete overview and available sizes available sizes see page 408.
see page 408.
SLANG SIHOSE

Synthetic hose connections
These hose connectors are made of synthetic material and are available in a straight, 60º or 90º bend type.

Type SLVBR Type Type
This is a straight type and suitable SLVBR40K Straight Ø 1 /16” (40 mm) SLVBR90K Straight Ø 3 /2” (90 mm)
1
9
for hoses with an internal diameter 3
7
9
of Ø 1 /16” to 5 /8” (40 to 150 mm). SLVBR45K Straight Ø 1 /4” (45 mm) SLVBR100K Straight Ø 4” (100 mm)
5
SLVBR50K Straight Ø 2” (51 mm) SLVBR110K Straight Ø 4 /16” (110 mm)
SLVBR
3
SLVBR60K Straight Ø 2 /8” (60 mm) SLVBR125K Straight Ø 5” (125 mm)
SLVBR65K Straight Ø 2 /16” (65 mm) SLVBR150K Straight Ø 6” (150 mm)
9
SLVBR75K Straight Ø 3” (75 mm)
Type SLVBG
Type Type
This is a 60º bend type and suitable
for hoses with an internal diameter SLVBG40K Bent 60˚ Ø 1 /16” (40 mm) SLVBG90K Bent 60˚ Ø 3 /2” (90 mm)
1
9
9
7
of Ø 1 /16” to 5 /8” (40 to 150 mm). SLVBG45K Bent 60˚ Ø 1 /4” (45 mm) SLVBG100K Bent 60˚ Ø 4” (100 mm)
3
5
SLVBG SLVBG50K Bent 60˚ Ø 2” (51 mm) SLVBG110K Bent 60˚ Ø 4 /16” (110 mm)
SLVBG60K Bent 60˚ Ø 2 /8” (60 mm) SLVBG125K Bent 60˚ Ø 5” (125 mm)
3
SLVBG65K Bent 60˚ Ø 2 /16” (65 mm) SLVBG150K Bent 60˚ Ø 6” (150 mm)
9
Type ELB SLVBG75K Bent 60˚ Ø 3” (75 mm)
This is a 90º bend type and suitable
for hoses with an internal diameter
of Ø 5”, 6”, 8” or 10” (127, 152, Type Type
203 or 254 mm). ELB90127 Bent 90˚ Ø 5” (127 mm) ELB90203 Bent 90˚ Ø 8” (203 mm)
ELB
ELB90152 Bent 90˚ Ø 6” (152 mm) ELB90254 Bent 90˚ Ø 10” (254 mm)
Flexible mountings for waterlocks
Minimise the noise
These flexible mountings can be used to minimise the noise caused by induced vibrations in
the waterlock. Code is for a set of 4 mounts.
Type
MGVIB45 Anti vibration mounts for MGP waterlocks up to 35 kg
MGVIB45 MGVIB55
MGVIB55 Anti vibration mounts for MGS, MGL and HPW waterlocks up to 143 lbs (65 kg)

Water mixer
In some boats the exhaust waterlock must be positioned so closely behind the engine’s exhaust manifold (this is especially true in
the case of near horizontal exhaust assemblies), that the injected cooling water does not always mix properly with the hot exhaust
gases. This often results in the exhaust hose and/or the waterlock becoming overheated.
Installation of a water mixer directly behind the exhaust manifold will prevent this problem.
The water mixer is available for exhaust hoses with inside diameter of 3 /2”, 4”, 5”, 6”
1
(90, 100, 125 or 150 mm).
For exhaust hoses For exhaust hoses
Type Type
Ø inch (mm) Ø inch (mm)
MIXER090 3 /2 (90) MIXER125 5 (125)
1
MIXER
MIXER100 4 (100) MIXER150 6 (150)
100 Exhaust systems - Want to know more? Visit www.vetus.com