Page 145 - Vetus

PRESSURIZED WATER SYSTEMS
Pressurized water system pumps type WP

Silent running and smooth operation
These pumps are designed for pressurized water systems, washing,
liquid transfer etc. Type WP is noiseless, low in energy consumption
and can run dry without damage. It is well equipped with a thermal
overload protection, built-in check valve and is auto demand with
built-in pressure switch. This pump is supplied with 2 straight and
2 angled 1/2” (13 mm) hose connections and inlet filter.
For voltage, flow, pressure, current and dimensions see table below.

WP..08
Volt Max Current L x W x H
Type Flow Pressure
(V) (A) inch (mm)
WP..13
2 gpm 30.5 PSI 8 /32 x 5 /8 x 4 /32
11
1
27
WP1208 12 5
(7.6 lpm) (2.1 Bar) (212 x 130 x 123)
2 gpm 30.5 PSI 8 /32 x 5 /8 x 4 /32
1
27
11
WP2408 24 3
(7.6 lpm) (2.1 Bar) (212 x 130 x 123)
3.5 gpm 45 PSI 8 /32 x 5 /8 x 4 /32
27
11
1
WP1213 12 7
(13.2 lpm) (3.1 Bar) (212 x 130 x 123)
3.5 gpm 45 PSI 8 /32 x 5 /8 x 4 /32
27
11
1
WP2413 24 4
(13.2 lpm) (3.1 Bar) (212 x 130 x 123)
13
5.3 gpm 61 PSI 9 x 5 /32 x 5 /64
25
WP1220 12 17
(20 lpm) (4.2 Bar) (229 x 147 x 132)
5.3 gpm 61 PSI 9 x 5 /32 x 5 /64
25
13
WP2420 24 10
(20 lpm) (4.2 Bar) (229 x 147 x 132)
WP..20
Accumulator tank type EXPAT075
Steady water pressure in the system
Made from high grade polyamide, this compact small capacity accumulator with rubber membrane provides a constant
flow in the vessels water circuit. The pressure in the accumulator prevents the water pump motor being started each time a
supply of water is required and the butyl rubber membrane is suitable for drinking water. Connecting is easy as there is no
preferred IN or OUT connection on this accumulator.
The EXPAT075 ensures a constant water flow, saves energy and minimizes noise. The accumulator is set to a pre-charge
pressure of 0,7 bar, but can be adjusted to optimal settings for your fresh water system (to a maximum of 8,5 bar).
Overall dimensions are 8 /4 x 7 /8 x 4 /2” (223 x 194 x 114 mm) and the accumulator is supplied with
5
3
1
two angled and two straight 13 mm hose pillars.
Specifications
• Smooths water flow
• Extends the lifespan of your fresh water pump
• Tank is suitable for confined spaces
• Dampens pulsation in the system
• Volume: 0,75 litre
• Temperature range: 0 to 122°F (0 to 50°C)
• Connections: 1/2” NPT Male
• Hose pillars: 1/2” NPT - 1/2” (13 mm) hose
• Weight: 0,36 kg
EXPAT075
Connections Dimensions l x b x h
Typ Capacity (l) Max. pressure (bar)
inches (mm) inches (mm)
5
3
1
EXPAT075 0,75 8,5 1 /2 (13) hose 8 /4 x 7 /8 x 4 /2
(223 x 194 x 114)
Creators of Boat Systems 145