Page 122 - Lewis

Push-Pull Switches 121

Cole-Hersee Push-Pull Switches
All brass construction, for 6-36 volts DC; non-corrosive interiors; moisture-repellent insulators.
All switches on this page accommodate 1" thick panels except for Fig. 3010, No. M606, which mounts
through 5/8" thick panels. All have screw-on knobs with 10-32 thread. Rated: 10 AMPS at 12V DC.
2-Position Push-Pull Switch H.D. 2-Position Sealed Push-Pull Switch
1 Circuit 1 Circuit

FIG 3010
COLE HERSEE
TWO POSITIONS: OFF–ON (S.P.S.T.). Normally "OFF". Two 18-
8113-10
gauge 12" long insulated copper wire leads. Mounting stem is
3/8" Diam. and 1-1/4" long. Has a chrome plated brass knob.
M482 Sealed in plastic to protect against moisture and dirt. Mounts
through panels to 5/8" thick, ideal for on deck applications.
No. Each Terminals
FIG 3008 M606 $26.60 2-12" Wire Leads
COLE HERSEE Standard Package – 10
TWO POSITIONS: OFF–ON (S.P.S.T.). This switch is normally PUSH-PULL SWITCHES
"OFF". Gasket-sealed, flanged case. For ignition lights and 2-Position Push-Pull Switch
compartment lights. 7/8" Diam. hand-polished chrome plated 1 Circuit
brass knob. Terminal screws and lock-washers. Mounting stem
is 3/8" Diameter and 1-1/4" long.
No. Each Terminals FIG 1792
M482 $23.50 2 Screw
8113-10 4.40 Spare Knob
Standard Package – 10 TWO POSITIONS: OFF–ON (S.P.S.T.). Normally "OFF". Brass
with stainless steel springs. Mounting stem is 1-1/4" long by
3/8"-24 thread. Chrome-plated plastic knob. Rated: 20 Amps at
2-Position Push-Pull Switch 6V DC, 15 Amps @ 12V DC.
1 Circuit No. Each Terminals
3952 $22.15 2 Blade
Standard Package – 10
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

2-Position Push-Pull Switch
Normally ON — 1 Circuit

FIG 3009
COLE HERSEE
TWO POSITIONS: OFF–ON (S.P.S.T.). 3/4" Diam. bright chrome- Typical wiring diagram for using two M-630
plated brass knob. Mounting stem is 3/8" Diam. and 1-1/4" long. switches to control the same accessory circuit
from either of two locations.
No Each Terminals
M628 $21.45 2 Screw FIG 3007
Standard Package – 10 COLE HERSEE
TWO POSITIONS: ON 1–ON 2 (S.P.S.T.). Normally "ON." "ON"
3-Position Push-Pull Switch in both positions for alternate energizing of any two circuits
individually from one common feed. Mounting stem is 3/8"
2 Circuits diam. and 1-1/4" long. 3/4" diameter chrome-plated brass
knob. Mounts in panels through 1" thick. 6-36 Volts DC. Rated:
10 Amps at 12V DC.
No. Each Terminals Std. Pkg.
M630 $25.15 3 Screw 10
3-Position Push-Pull Switch
2 Circuits

FIG 3011 FIG 1789
COLE HERSEE
THREE POSITIONS: OFF–ON 1–ON 1 & 2. Normally "OFF" single THREE POSITIONS: OFF–ON 1–ON 1 & 2. First "ON" position
pole. This switch is especially suited for lighting circuits such as energizes one circuit. Second "ON" position energizes both cir-
cabin and running lights. Energizes one circuit in first "ON" posi- cuits. Mounting stem is 1-1/4" long by 3/8"-24 thread. Chrome-
tion. Energizes two circuits in second "ON" position. Mounting plated brass knob. Rated: 20 Amps at 6V DC, 15 Amps @ 12V DC.
stem is 3/8" Diam. and 1-1/4" long. Chrome plated brass knobs. No. Each Terminals
No. Each Terminals 3958 $29.00 3 Screw
M476 $42.85 3 Screw Standard Package – 10
Standard Package – 10 WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
FOR TERMINAL ADAPTER NO. 55023 — SEE FIG. 3025