Page 398 - Vetus
P. 398

ALUMINIUM AND ZINC ANODES

       Protection by means of anodes is a ”must” for all metal parts under water.   Type of anode material
       Therefore anodes are required for wooden, fibre glass and aluminium hulls. The
       material of V-Quipment zinc anodes is of the highest possible standard, the U.S.   Type  Type of alloy according to
       mil.-A-18001 K. specifications. Anodes which do not meet these specifications have   Zinc  MIL-A-18001K
       little or no effect.
                                                                             Aluminium MIL-A-24779 (sh)
       V-Quipment aluminium anodes consist of an aluminium-indium-zinc alloy
       Mil - A - 24779 (SH). All V-Quipment anodes are streamlined and mounted either with
       studs which can be welded to a steel hull, or with through-hull bolts for fibreglass
       and wooden boats. We supply these studs and bolts separately.

       For vessels, which mostly cruise on inland (fresh) waters, we recommend aluminium anodes since aluminium has a greater
       difference of potential with other metals than zinc. This is very important, as fresh water provides a higher electrical resistance
       than salt water. For sailing on salt water or brackish water, we recommend the use of zinc anodes. Aluminium anodes also function
       well in salt water, but are sacrificed at a much faster rate. We do not recommend the use of magnesium anodes, as the difference
       of potential with other metals is too great which could cause damage to the hull paint, especially when sailing in brackish or salt
       waters.

       Use the table below to select the right anode suitable for the type of water in which the boat is generally used.

                                                       Hull material
       Water type       Wood              GRP              Aluminium         Steel            Sterndrive/ outboard
       Fresh            Aluminium         Aluminium        Aluminium         Aluminium        Aluminium
       Brackish         Zinc/ Aluminium   Zinc/ Aluminium  Zinc/ Aluminium   Zinc/ Aluminium  Aluminium
       Salt             Zinc/ Aluminium   Zinc/ Aluminium  Zinc/ Aluminium   Zinc/ Aluminium  Aluminium
       An annual inspection of the anode is needed, it should be replaced when the anode has been 50% sacrified.



       Bolt-on Series


                                                                                                           70
                        ALU08C                                             ALU15C
                                                                                                   74
                       ZINK08C                                             ZINK15C                150
                                     45
                                                                                                          25
                                         Ø 90






                                    ALU25C                                                         ALU35C

                                   ZINK25C                                                         ZINK35C






                               75
                                                                                              80



                   140                                                        200
                   250
                                                                              300
                               30
                                                                                              35





       398  V-Quipment - Want to know more? Visit www.vetus.com
   393   394   395   396   397   398   399   400   401   402   403