Page 55 - Vetus

ACCESSORIES
Water strainer kit
Kit to install any VETUS cooling water strainer with either /2, /4, 1, 1 /4 or 1 /2‘‘ (13, 19, 25 or 32
1
3
1
1
mm) hose connection.
The kit consists of: 2 mtr Drinking water hose,1 pc Ball valve, 4 pcs Hose clamps,
1 pc Waterscoop,1 pc Hose pillar.
Type Hose connection Thread connection
WKIT33013 ½” ½”
WKIT33016 5 /8” ¾”
WKIT33019 ¾” ¾”
WKIT33025 1” 1”
WKIT33032 1¼” 1¼” WKIT330..
WKIT33038 1½” 1½”

Connection parts for water strainers, type CONN330

Easy interconnecting
With these connection parts 2 water strainers type 330/32 or 470/32 can be interconnected with
a maximum capacity of 460 L/min.
Type 470 cannot be rotated when the kit is used.

Type Description
CONN330
CONN330 Connection kit for two FTR330/32 strainers

Bilge water/oil separator, type BISEP

Collecting and retaining oil and grease from bilge water
This VETUS separator has a replaceable filter element with a capacity of 600 grams. It can remove 95% of oil in the bilge
water. The bilge pump used in combination with this filter should have a maximum capacity of 25 litres/min.
The BISEP19 is now supplied with new filter elements. These filter discs are made from a different material, have a larger
capacity (up to 600 grams of oil) and filter up to 15.000 litres of water, outperforming the previous filter by 87%!
The new filter elements are reusable and made entirely from waste fibres. They absorb oils and oil-based contamination,
thus removing oils, oil film and fats from the bilge water.
The absorbed oil can be collected and recycled, after which
the filter can be washed and reused.

Specifications
• Connections for Ø /4” (19 mm) hoses
3
• Dimensions l 5 /16” x w 5 15/ 16” x h 6 /8” (148 x 150 x 162 mm)
13
3
Type Description
BISEP19 Bilge water/oil separator
Replacement element for bilge water/oil filter BISEP19,
BISEP19F2 BISEP19
set of 15 pieces

Cooling water hose, type MWHOSE

For all cooling fluids
Type MWHOSE is made of EPDM rubber with synthetic fabric and spiralled steel reinforcement.
Suitable for cooling water, both suction and pressure (max. 36,2 psi (2,5 bar)), salt and fresh
water. Temperature resistant between -22ºF (-30ºC) and + 248ºF (120ºC).
Unlike lower quality un-reinforced hoses, MWHOSE will not kink or fold shut, thereby
preventing a major cause of low seawater flow to the engine cooling system and consequent
damage to the impeller and the exhaust system. Similar benefits accrue from the use of this
hose for cockpit drains and other critical water connections.
MWHOSE
For a complete overview, specifications and dimensions of hoses see page 404.
Creators of Boat Systems 55