Page 612 - Lewis
P. 612

Varnishes and Wood Finishes                                              611




              Rapidclear & Rapidcoat Wood Finishes                                  Easy-Flow






















               FIG 1EPF

              Rapidclear is a semi-gloss coating that bonds extremely well to
              teak and other oily woods, preventing discoloration and empha-  FIG 1EPF
              sizing the natural grain of the wood. UV-protected. Interior and
              exterior above the waterline. Can be used for renewing areas
              prior to a varnish system or as a full system. No sanding  Designed primarily as a flow enhancer, Easy-Flow may also be
              between coats. Can be applied every five to six hours. Four to  used as a wood sealer or rust inhibitor. Based on a selection of
              five coats are sufficient under most conditions. Rapidcoat is  natural oils, it may be added at a rate of 5-10% by volume to
              lightly tinted and provides a rich warm color to any wood.   all conventional single-part and half-synthetic paints and var-
              UV-protected. Interior and exterior above the waterline. Apply  nishes to improve the flowing characteristics in conditions that
              every five to six hours. Three coats for most conditions.  are less than ideal. It will extend the wet-edge time and reduce
              No.        Each     Size     Case     Description    the possibility of lap or brush marks.
              RCC750    $58.80    Quart      6      Rapidclear     No.            Each           Size         Case
              RC750      58.80    Quart      6      Rapidcoat      EF1000        $47.40          Quart          6

                                                    Kwik Paint Remover                                                VARNISHES AND WOOD FINISHES



















                         FIG 3718b                       FIG 3717b                    FIG 3716b
                        For Wood & Metal                   Klean Strip                 For Fiberglass
                                                        Premium Stripper

              Kwik Paint and Varnish Remover – Fig. 3718 Quickly bites through the new, remover-resistant synthetics, plus all conventional finishes.
              Removes polyurethanes, baked enamel, paint, varnish, marine enamel, lacquer, shellac, automotive finishes and any synthetic or con-
              ventional marine finish. Can be used safely on finest mahogany, teak or other costly woods. Will not stain or darken wood if used as
              directed. Will not lift fillers or glues. Non Flammable. Kwik Fiberglass Paint and Varnish Remover – Fig. 3716 Removes polyurethanes,
              baked enamel, paint, varnish, marine enamel, lacquer, shellac, automotive finishes and any synthetic or conventional marine finish.
              Flammable. Klean Strip Premium Stripper – Fig. 3717 is the most powerful stripper for the toughest jobs. It strips multiple layers of latex
              and oil-based paint, polyurethane, epoxy, varnish and shellac from wood, metal and masonry surfaces. Removes most coatings in 15
              minutes or less. The paste formula clings to vertical surfaces without runs or drips. Flammable.
              Fig.         No.           Each           Size           Description                            Case
              3716          G           $66.00         Gallon          Fiberglass Paint and Varnish Remover    4
              3717          Q            26.40          Quart          Klean Strip KS3 Premium Stripper        6
              3718          G            54.45         Gallon          Paint and Varnish Remover               4
                                      Additional Varnishes Available — See Paint Price Lists
   607   608   609   610   611   612   613   614   615   616   617