Page 192 - Lewis

Hatch Lifters and Springs 191

Electromechanical Hatch Lifting Systems Electric Hatch Lifts

The rear bracket allows
a 125° oscillation range
of the actuator
60101
70381
15096

Hatch Lifts
Bracket
FIG 2079
AV4512 is a 12V electromechanical, anodized aluminum and
stainless steel hatch lifter that INCLUDES all mounting hard-
ware. Allows full or partial opening and closing, to any position,
of heavy engine hatches, peak tanks, hatch beams etc. Has an
internal self-locking mechanism preventing accidental closing.
Also INCLUDES an emergency devise for manual opening. FIG 5301
Lifting Closed
No. Each Stroke Capacity Length New clear anodized tubing made entirely of non-corrosive mate-
AV4512 $830.40 18" 265 lbs. 32.8"
rials. The ball screw spins freely when hatch is fully opened or
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov closed eliminating limit switches and burned out motors. It will
not drift, never binds, and runs in sync on dual lift applications.
Ready Switch It has powdered metal gears and a stainless steel ram which
locks in any position. O-ring sealed at 1,000 PSI. 70381-001
optional stainless steel non-locking slide bracket allows you to
pull the hatch open 4" in order to pull pin for access in case of
power failure. 15096-001 single rocker switch is optional for
hatch lifts. Complete with two 30" non-terminated power leads,
Deutsch receptacle(s), and hardware. All are 12V DC and rated at
10 Amps. The actuator extension harnesses are available in
FIG 7465 lengths of 7', 14', 20', 26', 32' and 45' (Special Order).
ROCKER SWITCH SOLD SEPARATELY HATCH LIFTERS AND SPRINGS
This switch is used to enable or disable a feature when a gas No. Each Stroke Extended Description
spring is activated. When installed on a gas spring, the switch 20764-001 $446.40 8" 28" 20" Hatchlift Assy.
can be used to activate a light, a buzzer or any other feature 20768-001 473.90 12" 36" 24" Hatchlift Assy.
you can think of. The switch can be positioned anywhere 20774-001 525.80 16" 45" 29" Hatchlift Assy.
along the rod and will not compromise the quality or function 20778-001 571.35 20" 53" 33" Hatchlift Assy.
of the gas spring. Applications include hatches, storage doors, 20782-001 619.00 24" 61" 37" Hatchlift Assy.
tonneau covers, camper shells, etc. The switch can only be 20788-001 662.40 30" 77" 47" Hatchlift Assy.
installed on gas springs and dampers with a body diameter of 15096-001 65.00 — — Rocker Switch
3/4". Made with heavy-duty black plastic. 60101-001 15.50 — — Spare S/S Pull Pin
No. Each Description 70381-001 64.50 — — S/S Slide Brkt.
ATSW $15.85 Gas Spring Switch 24-Volt – Available on Special Order
316 Stainless Steel Gas Springs
Nitro Lift

FIG 7734

These gas springs have anti-corrosive seals, controlled stroke speed and a cushioned stroke for safety and smooth operation. Each
gas spring is pressurized with nitrogen gas and contains a small amount of lubricating oil within the cylinder. They are tested for
-40° to +400° and are made of all stainless steel with two composite ends. Fits a 10mm ball stud.
No. Each PSI Lbs. Body Diam. Rod Diam. Extnd. Length Cmpress. Length Stroke
GS13 $57.25 20 5/8" 1/4" 15" 9" 6"
GS1440 62.35 40 5/8" 1/4" 20" 12" 8"
GS30 71.75 40 3/4" 5/16" 10" 7" 3"
GS31 68.35 20 3/4" 5/16" 7-1/2" 5-1/4" 2-1/4"
GS32 71.75 30 3/4" 5/16" 10" 7" 3"
GS33 78.60 40 3/4" 5/16" 15" 9" 6"
GS34 85.45 60 3/4" 5/16" 20" 12" 8"
GS35 75.20 30 3/4" 5/16" 12" 8" 4"
GS36 82.05 20 3/4" 5/16" 17" 11" 6"
GS37 92.30 35 3/4" 5/16" 26" 16" 10
See Next Page for Mounting Brackets and Blade Ends