Page 739 - Lewis

738 Parker Reusable Fittings

Reusable Fitting Assembly Instructions

20 Series 22 Series

OAL
OAL
OAL: Straight to Straight
OAL: Straight to Straight
1. Identify Over All Length (OAL) of 2. When assembling male pipe
hose assembly and the Cut Off ends, slide nipple onto man-
1. Identify Over All Length (OAL) 2. Place socket in vice and screw Allowance (COA) length of fit- drel.
of hose assembly and the Cut in hose counter-clockwise until ting(s) on hose ends. Properly
Off Allowance (COA) length of hose bottoms. Back hose out measure, mark and cut hose to
fitting(s) on hose ends. 1/2 turn. desired length using fine tooth
Properly measure, mark and hacksaw or a cutoff machine.
cut hose to desired length
using fine tooth hacksaw or a
cutoff machine.

3. When assembling swivel ends, 4. Oil nipple threads and inside of
screw threaded mandrel all hose with Hoze-Oil or heavy oil.
the way into interior threads of Caution: Do not oil hose cover.
swivel and wrench tight.
5. Push nipple into socket.
Male ends: Thread nipple in until it bot-
toms against socket.
3. Oil inside of hose and nipple 4. Screw nipple assembly into Swivel ends: Apply wrench to hex of
threads liberally. socket using wrench on nipple assembly mandrel.
For Oil No. HA5430 — hex until nipple hex shoulders Thread nipple clockwise into socket until
See Fig. 6564 against socket.
clearance between nut and socket is
approx. 1/32" (.794mm) to allow nut to
swivel. Remove mandrel.
CAUTION : Do not attempt to assemble these fittings to the hose with-
out using a mandrel. See previous page for mandrel kit.

Reusable Parker Hose Fittings
PARKER REUSABLE FITTINGS No. $12.55 Tube Size Thread Hose Seat Angle Standard Zinc-Coated Steel T1 Notch ≠
All Zinc-Coated Steel and Brass (where noted) for use with Parker 221FR Marine Fuel and Engine Hose

FIG 1PAR

FEMALE UNIVERSAL JIC37° AND SAE45° FLARE – SWIVEL – STRAIGHT
Fitting
Accepts
T1
Size
Each
Finish
Package
5
9/16"–18
25
20620-6-5*
37°
3/8"
6.80
6
9/16"–18
Zinc-Coated Steel
20620-6-6*
3/8"
25
37°
Zinc-Coated Steel
20820-6-6**
11.30
6
5/8"–18
25
3/8"
45°≠
37° & 45°
8
Zinc-Coated Steel
25
3/4"–16
20620-8-8
9.30
1/2"
20620-10-10
5/8"
7/8"–14
20620-16-16
26.50
37°
1"
16
Zinc-Coated Steel
10
20622-5-5B*
16.95
5
37° & 45°
25
1/2"–20
Brass
Brass
25
3/8"
9/16"–18
20622-6-6B*
14.25
37°
6
25
37° & 45°
20622-8-8B* 14.45 5/16" 1-5/16"–12 10 37° & 45° 25 Zinc-Coated Steel Zinc-Coated Steel
17.85
Brass
3/4"–16
8
1/2"
20622-10-10B* 26.25 5/8" 7/8"–14 10 37° & 45° 25 Brass T1
20622-12-12B* 35.15 3/4" 1-1/16"–12 12 37° 15 Brass
20822-6-6B** 18.90 3/8" 5/8"–18 6 45° 25 Brass
20822-12-12B** 34.10 3/4" 1-1/16"–14 12 45° 15 Brass Brass
FEMALE UNIVERSAL JIC37° AND SAE45° FLARE – SWIVEL – 45° ELBOW
Fitting T1 Hose Accepts Standard
No. Each Tube Size Thread Size Seat Angle Package
23720-8-8 $19.10 1/2" 3/4"–16 8 37° & 45° 5
23720-12-12* 30.35 3/4" 1-1/16"–12 12 37° 5
*JIC 37° Only
23720-8-8
**SAE 45° Only ≠ Notch on nut indicates SAE 45° flare
T1